45 Ton Minster O.B.I. Press For Sale
- Model: #5
- Year: 1963
- Capacity: 45 Ton
- Slide Adjustment: 2.75″
- Shut Height: 10.75″
- Speed: 165 SPM
- Bed Area: 28″ x 18″
Author Archives: Dev
30,000lb. Capacity Grove Carry Deck Crane For Sale
30,000lb. Capacity Grove Crane
- Capacity: 30,000lbs.
- Engine: Cummins Clean-Burning Diesel
- 4WD
- 4-Wheel Steer
- 4-Section Boom
- Year: 2005
- Model: YB5515
- Hours: 6,567
1,000 Ton Danly Single-Action Press For Sale
1,000 Ton Danly Single-Action Press For Sale
- Year: 1985
- Model: SE4-1000-144-84
- Capacity: 1,000 Tons
- Bed Area: 144″ x 84″
- Slide Area: 144″ x 84″
- Stroke: 36″
- Shut Height: 76″
- Slide Adjustment: 6″
- Speed: 8-20 SPM (Variable)
- Equipped With: Dual-side moving bolsters, full tonnage micro inch drive
80,000lbs. Capacity Taylor Forklift with Fork Positioner For Sale
80,000lbs. Capacity Taylor Forklift with Fork Positioner For Sale
- Year: 1972
- Model: Y-80-WO
- Serial: S-85-9760
- Capacity: 80,000lbs. @ 52″ Load Center
- Hydraulic Fork Positioner
- Fork Length: 9′
- Lift Height: Approx. 16′
- Hours: 3,967
Harig Grinder – 6″ x 12″ Table For Sale
|
Harig Grinder – 6″ x 12″ Table For Sale
|
80 Ton Gantry Swivel Hook For Sale
80 Ton Gantry Swivel Hook For Sale
Chevalier FSG-3A818 Surface Grinder with DRO For Sale
Chevalier FSG-3A818 Surface Grinder with DRO For Sale
MODEL: FSG-3A818 S/N: M3804001 Year: 1991 Note: The center hand wheel will need a handle, it got knocked off moving it. The two other hand wheels will need handles.
This came from Stryker, they manufacture medical equipment and take excellent care of their machines.
MAX. GRINDING CAPACITY ………………….. 8″ X 18″
MAX. LONGITUDINAL TABLE TRAVEL, HYDRAULIC …. 19- 3/4″
MAX. LONGITUDINAL TABLE TRAVEL, MANUAL ……. 21″
MAX. CROSSFEED TRAVEL, AUTOMATIC …………. 9″
MAX. CROSSFEED TRAVEL, MANUAL ……………. 9- 1/2 “
DIST. FROM SPINDLE CENTER TO TABLE ……….. 18 “
VARIABLE TABLE SPEED, HYDRAULIC ……… 16′ TO 82′ FPM
AUTOMATIC CROSSFEED INCREMENT ……….. 0.02″ TO 0.24″
RAPID TRAVEL, CROSS FEED …………………. 48″ IPM
CROSSFEED HANDWHEEL, PER GRADUATION ……….. 0.001″
PER REVOLUTION ……….. 0.2″
AUTOMATIC INCREMENTAL DOWNFEED ……… 0.0001″ TO .002″
AUTO DOWNFEED DIAL PER GRADUATION ……….. 0.0005″
PER REVOLUTION …………………………… 0.1″
RAPID TRAVERSE RATE ……………………. 13″ IPM
SPINDLE MOTOR ……………………………. 2 HP
STANDARD GRINDING WHEEL ………….. 8″ DIA. X 1/2″ X 1.25″
APPROX. WEIGHT ………………………… 2,620 LBS.
APPROX. FLOOR SPACE REQUIRED …….. 86″ X 61″ X 75″H
STANDARD MACHINE FEATURES FOR THIS MODEL:
FULLY PROGRAMMABLE AUTO-CYCLE CONTROL W/DIGITAL DISPLAY
-AUTOMATIC INCREMENTAL DOWNFEED (PLUNGE & SURFACE)
-SPARKOUT CYCLE ADJUSTABLE FRO 0 TO 9 TIMES
-AUTOMATIC WHEELHEAD RETRACTION @ COMPLETION OF CYCLE
-POWER RAPID WHEELHEAD POSITIONING
HYDRAULIC TABLE TRAVERSE
POWER CROSSFEED BY AC MOTOR
TABLE GUIDEWAYS ARE HARDENED AND GROUND
BALL BEARINGS FOR FRICTIONLESS TABLE MOVEMENT
ALL SLIDEWAYS ARE LAMINATED WITH TURCITE-B & PRECISELY
HAND-SCRAPED FOR ACCURACY.
“MICRO” FINE FEED FOR VERTICAL AXIS (.0001″ GRAD.)
EXTERNAL HYDRAULIC SYSTEM
AUTO LUBE SYSTEM
2 H.P SUPER-PRECISION DIRECT DRIVE SPINDLE
I’m a Rigger – Keep me upto date on available equipment!
Hardinge Chucker Lathe HC with Threading HCT CF For Sale
Hardinge Chucker Lathe HC with Threading HCT CF For Sale
SPECIFICATIONS:
MAX FIXTURE DIAMETER …………….. 9″
MAX DISTANCE FROM FACE OF TURRET
TO SPINDLE ………………….. 14″
SPINDLE CAPACITY
WITH ROUND 5C COLLETS ………… 1-1/16″
WITH 5C STEP CHUCKS ………….. 1-1/16″ TO 6″
WITH JAW CHUCKS ……………… 6″
SPINDLE TAPER …………………… HARDINGE THREADED NOSE
TRAVEL OF CROSS SLIDE ……………. 4-1/2″
CROSS SLIDE POWER FEED RANGE ……… 11/32 TO 6-1/4 IPM
CARRIAGE POWER FEED RANGE ………… 1/4 TO 10 IPM
VARIABLE SPINDLE SPEEDS, (3 SELECTOR)
LOW SPEEDS ………………….. 125 – 1,100 RPM
HIGH SPEEDS …………………. 1100 – 3,000 RPM
MAX DIAMETER FOR THREADING ……….. 6″EXTERNAL, 5″INTERNAL
APPROXIMATE WEIGHT ………………. 1,750 LBS.
EQUIPPED WITH:
- HARDENED AND GROUND DOVETAIL BED
- LEVER-TYPE COLLET CLOSER FOR TYPE 5C COLLETS
- INDEPENDENT ELECTRICAL VARIABLE POWER FEED TO CARRIAGE
- EIGHT STATION CROSS FEEDING TURRET
- EIGHT POSITION TURRET-TYPE CARRIAGE STOP
- HARDINGE THREADING ATTACHMENT
Click Here For Updates on Machines & Equipment As They Become Available
MACHINE WIRED FOR THREE PHASE 60 CYCLE 230 VOLT OPERATION
Norton Surface Grinder 8 x 24 For Sale
Norton 8 x 30 Surface Grinder For Sale
Gallmeyer & Livingston Model 55 Hydraulic Surface Grinder 12 x 36 Table For Sale
Gallmeyer & Livingston Model 55 Hydraulic Surface Grinder 12 x 36 Table For Sale
Item Specs:
- Model 55
- Year 1953
- Longitudinal table speed: 125 fps
- Table travel longitudinal: 38″
- Transverse travel: 13 1/2″
- 36″ x 12″ table
- 14″ wheel
- Vertical wheel head movement: 18″
- 1800-2140 spindle speed RPM
- 5HP hydraulic pump
- 5HP spindle drive motor
- Center of spindle to bottom of spindle housing: 3″
- Weight Approx. 9,000lbs
- Comes with manual and drawings
- NOTE: I was told the 12×36 chuck no longer works, however it does come with a 10×30 working chuck.
Click Here For Updates on Machines & Equipment As They Become Available
