Author Archives: Dev

Brown & Sharpe Hand Feed Ball Roller Surface Grinder

Posted on by

Brown & Sharpe Hand Feed Ball Roller Surface Grinder

  • Serial Number – 523-510-2280
  • Model – 510
  • Year – 1960’s
  • Table Size – 5″ x 10″
  • Travels Long – 11″
  • Cross – 5″
  • Vertical – 12″
  • Wheel Size – 7″ x 3/4″ x 1-1/4″
  • Motor – 1 HP
  • One Shot Lube
  • Lever Handle for Long Travel
  • Fine Feed for Down
  • Excellent condition

Brown & Sharpe Surface Grinder 1 Brown & Sharpe Surface Grinder 2 Brown & Sharpe Surface Grinder 3 Brown & Sharpe Surface Grinder 4

200 Ton Gantry System For Sale

Posted on by

200 Ton Gantry System 

  • Two Lifting Towers
  • One Mfg by Lift Systems Power unit
  • Capacity 200 Tons
  • Lifts 19′
  • Collapsed Height 10′
  • Power Travel
  • Power unit has 4 cylinder Ford gas engine
  • Base of Jack overall dimensions 49″ x 67″
  • Overall dimensions of power unit 85″ x 61″ x 48″ tall
  • –no lifting beams or runway is included–

200 Ton Gantry 3 200 Ton Gantry 2 200 Ton Gantry 1

 

Brown & Sharpe Grinder

Posted on by

Brown & Sharpe Grinder 

  • Table Size           5″ x 10″
  • Travels Long      11″
  • Cross                  5″
  • Vertical               12″
  • Wheel Size          7″ x 3/4″ x 1-1/4″
  • Motor                  1 HP
  • Serial Number    523-510-2280

 Equipped With:

  •  5″ x 10″ Brown & Sharpe Chuck
  • One Shot Lube
  • Lever Handle for Long Travel
  • Fine Feed for Down

Brown & Sharpe Grinder 1 Brown & Sharpe Grinder 2 Brown & Sharpe Grinder 3

Bruderer Presses (3 Available)

Posted on by

Bruderer Presses (3 Available)

3 PRESSES AVAILABLE!

500kn Bruderer 

  • -Year is 1999
  • – Model BSTA 50USL
  • – Bed 1080mm x 650mm x 294mm
  • -480 Volt
  • -60 Hz
  • -Weight is 8750kg

500kn Bruderer 

  • -Year is 2002
  • – Model BSTA 500-110B
  • – Bed 1080mm x 650mm x 294mm
  • -480 Volt
  • -60 Hz
  • -Weight is 8850kg

800kn Bruderer 

  • -Year is 1999
  • – Model BSTA 80USL
  • – Bed Size 1430mm x 910mm x 340mm
  • -480 Volt
  • -60 Hz
  • -Weight is 17,500kg

 

Bruderer Press 2 Bruderer Press 3  Bruderer Press 5 Bruderer Press 6 Bruderer Press 7  Bruderer Press 9 Bruderer Press 10 Bruderer Press 11 Bruderer Press 12 Bruderer Press 13plate 1 plate 2 plate 3

Aquamaster Parts Washer

Posted on by
Aquamaster Parts Washer

 
  •  3 Stage stainless steel washer with drying stage
  • Open in the end is 38″ wide x 42″ high.
  • Stage # 1 heated, is 104″ long with 12 risers and 62 nozzles, pump output  —  GPM
  • Stage # 2 heated, is 71″ long  with 8 risers and 40 nozzles pump out put 320 GPM
  • Stage # 3 is 96″ long and is equipped with heated air blowers and knife blow-offs.
  • Model CB3800
  • Tanks are all SS and tunnel is of formed poly designed to swing up for easy access to interior.
  • Over all length of system is 30′
  • The washer is in good condition and represents a new in excess of $150,000

Aquamaster Parts Washer 1 Aquamaster Parts Washer 2 Aquamaster Parts Washer 3 Aquamaster Parts Washer 4 Aquamaster Parts Washer 5 Aquamaster Parts Washer 6