Haas VMC CNC Milling Machine VF-2

Haas VMC CNC Milling Machine VF-2

  • Year 1998
  • Voltage 208/230
  • Phase 3
  • Hertz 50/60
  • Travels: X 30″, Y 16″, Z 20″
  • Spindle Motor 20HP
  • Spindle Speed 7,500 RPM
  • Spindle Nose to Table Top 4″ to 24″
  • Spindle Taper CAT 40
  • Tool Changer 20
  • Machine Weight 8,000

Click Here For Updates on Machines & Equipment As They Become Available

The above specifications are to the best of our knowledge based on our research.  You may wish to confirm them with the factory.

photo 1 photo 2 photo 3 photo 4

Aercology Portable Electrostatic Fume Mist Dust Collector EPP-1200 (Donaldson)

Aercology (Donaldson) Electrostatic Dust Fume Mist Collector

EPP-1200

 
As you can see from the pictures, the arm tube has come apart and will need repair or replacement.  Below are specifications we have pulled from the internet. You may want to double check the against factory info if need be.

 
Aercology Portable Electrostatic Precipitator.
EPP-1200
Serial 39939
Model EPP-1200
Nominal Capacity: 1200cfm
Voltage 1 phase/ 115 Volts / 13 Amps
Pickup velocity: 2200FPM
304 lbs +/-
photo 1(3)photo 3(1) photo 2(2)  photo 4

AirFlow PAC-91 Portable Mist Fume Dust Collector

AirFlow PAC-91 Portable Mist Fume Dust Collector

3 Available

Units do not have arm and tube or casters.
Wired for 440-480 volt, 3 Phase
 
Factory specs:
 
Features & Benefits
  • Complete, Self-contained Unit: Versatile, easy to use; no installation required.
  • 10-ft. E-Z Arm® High Flow Extractor: Self supporting external arm provides for maximum performance, reduces operator fatigue.
  • Efficient Source Capture:95%+ filtration efficiency produces cleaner air; system simplifies OSGA and insurance compliance.
  • Direct-drive Blower: Higher static pressure, longer filter life and greater reliability; non-sparking; no belts or pulleys to replace.
  • Non-electrostatic Operation: High reliability, low maintenance.
  • Narrow Width Design: Permits access and maneuverability in tight spaces.

photo 4(1) photo 3(2) photo 2(3) photo 1(4)

Diversi-Tech FRED Fume Mist Dust Collector

These are the specifications I found on the internet.  The should be right, so you may want to double check them.
 
Diversi-Tech FRED Mist Dust Fume Collector (2 Available)
Year 1995

8″ Diameter Dirty Air Inlet
Rated Inlet Capacity:  800 CFM with 6-1/2″ Diameter Pipe
Dirty Air is Drawn in at the Base of the Unit and is Exhausted Out the Top
Filter #1, Polyester Pre-Filter 24″ x 24″ x 2″ Disposable
Filter #2, Aluminum Mesh 24″ x 24″ x 1″ Washable
Filter #3, Polypropylene Weave 24″ x 24″ x 4″ Washable
Filter #4, 12″ Deep 95% Drop Rigid Cell Filter  24″ x 24″ x 12″ Washable
Filter #5, 2″ Carbon Impregnated Pleated Polyester 24″ x 24″ x 2″ Disposable
Filter #6, Optional Hepa Filter Disposable
1-1/2 HP, 3 Phase Motor, Wired for 460v
Overall Size: 32″ x 29″ x 72″ High

photo 2(1) photo 1(2)

Monarch Metal Lathe – 72″ Between Centers

Monarch Metal Lathe – 72″ Between Centers

  • Tag reads:
  • Catalog size: 20″
  • Serial: 41551
  • Actual swing: 22.5″
  • Distance between centers: 72″
  • Year: 1956
We did a little looking and have found these specs from other sources for the Monarch lathe.  These specs are to the best of our knowledge……that being said, you will want to double check the info using the serial number or physical inspection.

Machine Details:

  • MODEL ………………………… 20CM
  • SWING OVER WAYS ……………….. 22-1/2″
  • DISTANCE BETWEEN CENTER ………… 72″
  • SWING OVER CROSS SLIDE …………. 13″
  • SPINDLE SPEEDS ………………… (12) 9 TO 400 RPM
  • FEEDS ………………………… (48) .005 TO .240 IPR
  • THREADS ………………………. (48) 3/4 TO 46 TPI
  • DIAMETER OF SPINDLE HOLE ……….. 2-1/4″”
  • TAPER ATTACHMENT ………………. YES
  • SWIVEL COMPOUND ……………….. YES
  • THREAD DIAL …………………… YES
  • HARDEN WAYS …………………… YES
  • SPINDLE FORWARD & REVERSE ………. YES
  • COOLANT WITH CHIP PANS …………. YES
  • MOTOR ………………………… 10 HORSEPOWER

Monarch Metal Lathe 1 20140626_152932 20140626_152911 20140626_152853 20140626_152842Monarch Metal Lathe 2 Monarch Metal Lathe 3 Monarch Metal Lathe 4

 

Moore Jig Grinder No 3

Moore Jig Grinder No 3

  • Serial Number G1376
  • Machine was rebuilt at a cost of $40,000 with very little use since rebuild — excellent condition

Moore Jig Grinder No. 3 1 Moore Jig Grinder No. 3 2 Moore Jig Grinder No. 3 3 Moore Jig Grinder No. 3 4 Moore Jig Grinder No. 3 5 Moore Jig Grinder No. 3 6 Moore Jig Grinder No. 3 720140627_10214820140627_10132120140627_101240