Axelson Engine Lathe
- Axelson Engine Lathe 144″ x 24″
Click Here For Updates on Machines & Equipment As They Become Available
Author Archives: Dev
Giddngs & Lewis Chipmaster Radial Arm Drill
Giddngs & Lewis Chipmaster Radial Arm Drill
- 8′ Giddngs & Lewis Chipmaster Radial Arm Drill
- Column 19″
- Year 1974
- 5# Morris Taper
- over all dims 171″ wide x 65″ deep x 186″ high
Click Here For Updates on Machines & Equipment As They Become Available
Buehler Saw
Buehler Isomet 2000 Precision Saw
- Serial Number: 465 IST 0231
- Volts: 85/264
- Amps: 9/3
- Watts: 800
- Phase: 1
Click Here For Updates on Machines & Equipment As They Become Available
Bolster Plate 48″ x 42″ x 3 3/4″
Bolster Plate 48″ x 42″ x 3 3/4″
- Bolster Plate 48″ x 42″ x 3 3/4″
Click Here For Updates on Machines & Equipment As They Become Available
Bolster 48 x 42 x 3 34 For Sale
Rolling Bolster Plate 108″ x 72″ x 17″
Rolling Bolster Plate 108″ x 72″ x 17″ T-Slotted
- T-Slotted
Click Here For Updates on Machines & Equipment As They Become Available
Rolling Bolster Plate 108 x 72 x 17 For Sale
Rolling Bolster Plate 108 x 72 x 17 For Sale
250 Ton D&K Press For Sale
D & K Straight Side Double Crank Press For Sale
- Capacity 250 ton
- Bed 72″ x 42″
- Speed 20-40 Strokes/min
- Shut Height 21″
- Stroke 8″
- Bearing in the flywheel needs to be replaced. Seller would have this repaired
Click Here For Updates on Machines & Equipment As They Become Available
Delta Carbide Tool Grinder
Click Here For Updates on Machines & Equipment As They Become Available
Delta Carbide Tool Grinder
Model: JF23-505M
Type SS
Frame 165
1/2 HP
3450 RPM
Aercology Portable Electrostatic Fume Mist Dust Collector EPP-1200 (Donaldson)
Aercology (Donaldson) Electrostatic Dust Fume Mist Collector
EPP-1200
As you can see from the pictures, the arm tube has come apart and will need repair or replacement. Below are specifications we have pulled from the internet. You may want to double check the against factory info if need be.
Aercology Portable Electrostatic Precipitator.
EPP-1200
Serial 39939
Model EPP-1200
Nominal Capacity: 1200cfm
Voltage 1 phase/ 115 Volts / 13 Amps
Pickup velocity: 2200FPM
304 lbs +/-
EPP-1200
Serial 39939
Model EPP-1200
Nominal Capacity: 1200cfm
Voltage 1 phase/ 115 Volts / 13 Amps
Pickup velocity: 2200FPM
304 lbs +/-
AirFlow PAC-91 Portable Mist Fume Dust Collector
AirFlow PAC-91 Portable Mist Fume Dust Collector
3 Available
Units do not have arm and tube or casters.
Wired for 440-480 volt, 3 Phase
Factory specs:
Features & Benefits
- Complete, Self-contained Unit: Versatile, easy to use; no installation required.
- 10-ft. E-Z Arm® High Flow Extractor: Self supporting external arm provides for maximum performance, reduces operator fatigue.
- Efficient Source Capture:95%+ filtration efficiency produces cleaner air; system simplifies OSGA and insurance compliance.
- Direct-drive Blower: Higher static pressure, longer filter life and greater reliability; non-sparking; no belts or pulleys to replace.
- Non-electrostatic Operation: High reliability, low maintenance.
- Narrow Width Design: Permits access and maneuverability in tight spaces.
Diversi-Tech FRED Fume Mist Dust Collector
These are the specifications I found on the internet. The should be right, so you may want to double check them.
Diversi-Tech FRED Mist Dust Fume Collector (2 Available)
Year 1995
8″ Diameter Dirty Air Inlet
Rated Inlet Capacity: 800 CFM with 6-1/2″ Diameter Pipe
Dirty Air is Drawn in at the Base of the Unit and is Exhausted Out the Top
Filter #1, Polyester Pre-Filter 24″ x 24″ x 2″ Disposable
Filter #2, Aluminum Mesh 24″ x 24″ x 1″ Washable
Filter #3, Polypropylene Weave 24″ x 24″ x 4″ Washable
Filter #4, 12″ Deep 95% Drop Rigid Cell Filter 24″ x 24″ x 12″ Washable
Filter #5, 2″ Carbon Impregnated Pleated Polyester 24″ x 24″ x 2″ Disposable
Filter #6, Optional Hepa Filter Disposable
1-1/2 HP, 3 Phase Motor, Wired for 460v
Overall Size: 32″ x 29″ x 72″ High
