Wellsaw

Wellsaw

  • Model – 1220G
  • Serial – 289
  • Year 1993
  • New cost today would be $50,000
  • Up to 78″ Diameter
  • Automatic Cutting Force Control and Blade Brake

Wellsaw Saw  (1) Wellsaw Saw  (2) Wellsaw Saw  (3) Wellsaw Saw  (4) Wellsaw Saw  (5) Wellsaw Saw  (6) Wellsaw Saw  (7) Wellsaw Saw  (8) Wellsaw Saw  (9) Wellsaw Saw  (10) Wellsaw Saw  (11) Wellsaw Saw  (12) Wellsaw Saw  (13)

400 Ton Lift Systems Hydraulic Gantry with Runway & Lifting Beams

400 Ton Lift Systems Hydraulic Gantry with Runway & Lifting Beams 

  • Year 2003
  • Four Jacks Model 22A
  • Base Dimensions of Jacks 67.5″ length x 48″ wide – Weight each 5,250 lbs
  • Retracted Height 9′ 10 15/16″
  • Lift Height 27′ 4 15/16″
  • Self Propelled Cylinders
  • Two Power Units
  • Meter Reads 228 hours on 1st unit and 218 hours on 2nd unit
  • Propane Powered
  • 200 Gallons each
  • Weight each 3,100 lbs
  • Equipped with: 80′ of runway ( 40′ each side ) – Four Lifting Links – Two Lifting Beams 35′ Long x 36″ Tall x 16″ Flange – Hoses
  • Note: The beams and runway pictured in assembling the press are not the one’s that come with the machine – they are in separate photos

I’m a Rigger – Keep me upto date on available equipment!
I’m a Manufacture – Click Here For Updates on Machines & Equipment

400TonGantry-1 400TonGantryLiftBeam-1 400TonGantryRings 400TonGantryRunway-1 20130926_075322 20130926_075420 20130926_101047 20130926_101523

Kasto Cold Saw

Kasto Cold Saw with Power Vise

Year 2006

Cutting range:

  • Cutting range   90°   round Full material   3.94 in.
  • Cutting range   90°   round Tubes   3.94 in.
  • Cutting range   90°   square Tubes   3.54 x 3.54 in.
  • Cutting range   90°   flat square   6.69 x 3.54 in.
  • Cutting range   +/- 45°   round Full material   3.94 in.
  • Cutting range   +/- 45°   round Tubes    3.94 in.
  • Cutting range   +/- 45°   square Tubes    3.54 x 3.54 in.
  • Cutting range   +/- 45°   flat square    4.92 x 3.54 in.
  • Cutting range   + 60°   round Full material   3.54 in.
  • Cutting range   + 60°   round Tubes   3.54 in.
  • Cutting range   + 60°   square Tubes   3.54 x 3.54 in.
  • Cutting range   + 60°   flat square     3.54 x 3.54in.

Dimensions and Weight:

  • Length 23.62 in.
  • Width 47.24 in.
  • Height 86.61 in.
  • Material support height 35.43 in.
  • Total weight 1,100 lbs.

Power characteristics:

  • Power 2.38 / 3.17 HP
  • Voltage 400 Volt / 50 Hz
  • Cutting speed – 118.08/236.16 ft./min or 59.04/118.08 ft./min

Dimensions of saw blade

  • 13.78 x 0.10 x 1.26 in.

Electrical equipment:

  • Supply voltage 220/440 Volts, 3 Ph, 60 Cycles
  • Control voltage 24 V DC

Kasto Cold Saw

Kasto U10 Cold Saw 8 Kasto U10 Cold Saw 7 Kasto U10 Cold Saw 6 Kasto U10 Cold Saw 5 Kasto U10 Cold Saw 4 Kasto U10 Cold Saw 3 Kasto U10 Cold Saw 2 Kasto U10 Cold Saw 1

800 Metric Ton Weingarten

800 Metric Ton Weingarten

 

Year – 1979
Model # – DK 800.12.40
Pressing Force – 800 Metric Ton
Stroke of Slide – 400 mm — 15.748″
Strokes per Minute – 30 SPM Cont. Run
Adjustment of Slide – 100 mm — 3.93″
Area of Slide and Table – 1200 x 1200 mm — 47.24″ x  47.24″
Clearance Distance Between Columns – 1500 mm — 59.05″
Includes – loading robot and scrap trim material conveyor

 

 

225 Ton Niagara Gap Frame Press For Sale

Niagara Gap Frame Press
Year 1973
Model S2G-225-77-32
Capacity 225 Tons
Bed Area 86” x 32”
Slide Area 72” x 30”
Stroke 16”
Slide Adjustment 6”
Shut Height 60” W/O risers
Speed 30 SPM
Equipped with: Air Clutch and Brake, Air Counterbalances

NiaGap225

32 Ton Minster Punch Press No. 4 OBI For Sale

  • Minster OBI Press
  • Serial Number 4-23106
  • Model No 4
  • Year 1977
  • Capacity  32 Tons
  • Bed Area  22″ x 13 1/2″
  • Stroke  2″
  • Slide Adjustment  2 1/4″
  • Shut Height  7″
  • Weight 5,750 LBS
  • Speed 100 to 200 approximate
  • Equipped with: Air Clutch and Brake, No Bolster Variable Speed Drive

Minster 32 Ton no 4 punch press for sale 1