96 x 55 x 9 Bolster Plate
Author Archives: Dev
1,500 Ton Engel Injection Molding Machine – Sold
1,500 Ton Engel Injection Molding Machine
- Model Number: 1540
- Year: 1990
- Overall Length: 60 ft.
- Height: 15 ft.
- Diameter of tie bars: 9 in.
- Length of tie bars: 20 ft.
- Platens: 15 in. thick; 8 ft. square
- Clamp opening: 9 ft.
- Distance between tie bars: 60 in. x 60 in.
- Approximate weight: 225,000 lb.
Fellows Gear Shaper
Fellows Gear Shaper
- Type 8-AGS
- Number 34088
- Weight 6,800 lbs
- Overall Dim. 5′ 6″L x 3′ 10″W x 6′ 9″H
- Machine has several change gears, can be put under power for inspection in Cleveland Ohio, it holds good tolerance
100 Ton Hydraulic Gantry
100 Ton Hydraulic Gantry – Call for updated inventory, 616-200-4308 this is sold
- Mfg by local riggerIncludes 2 complete jack and electric power unit
- Capacity on first stage 100 ton
- Overall Dimensions of base 64″ x 42″
- Overall Dimensions of hat 19 1/2″ x 24″
- Collapsed Height 4′ 6″
- Full Extended Height 12′
- Motor 7.5 HP – 3 Phase – 220/440 Volts
- Year Mfg 1995
- There is no certified tag
50/15 Ton P&H Overhead Bridge Crane
50/15 Ton P&H Overhead Bridge Crane
- P & H Overhead Crane
- Capacity 50/15 ton
- Span 95′ span
- Lift 38’10” lift (wire on drum for 32′), remote control
- The crane has all new:
- inverter variable speed controls
- new brakes
- motors rewound in 2002 by Crane Tech in Rochester Hills MI (Crane Tech s/n NC 198)
- It is outside but all motors, hoists, and electrical controls are securely wrapped.
10 Ton Acco Overhead Bridge Crane
10 Ton Acco Overhead Bridge Crane
- 10 ton Acco Top Running Overhead Bridge Crane
- 3 Machines Available
- Span 51′ 4′
- Year 1984
- Lifts 23′
Sharnoa HPM-85 Machining Center
Sharnoa HPM-85 Machining Center
- CNC Vertical Machining Center
- Age: 1994
- X-Axis Travel 85″
- Y-Axis Travel 34″
- Z-Axis Travel 22″
- Spindle Nose to Table Top 10″-38″
- Table Size 94″ x 33.5″
- Table Load Capacity 6600 Lbs
- Spindle Speeds to 6000 RPM
- Spindle Taper BT 50
- Spindle Drive Motor 28 HP
- Tool Changer 30 ATC
- Tiger 7 controls
Fanuc LR Series Robot
Fanuc LR Series Robot — Call for other options, 616-200-4308..this machine is sold!
- S/N 1021528
- was on a Mori Seiki Lathe
- Teach Pendant A05D2115C001
Pines Tube Bender
Pines Tube Bender
- Model 3T
- Serial Number 44361 78050
- Year 1978
- 20 HP Motor
- 220 Volts-3 Phase-60 HZ
- Equipped with some tooling, 1/2″, 3/4″, 1″
Jet Radial Arm Drill
Jet Radial Arm Drill — Call for other options, 616-200-4308..this machine is sold!
- Model 750
- Year 1996
- Spindle Speed is 88 to 1
- 500 RPM’s
- Spindle drive motor 2 HP
- Arm elevation motor 1 HP
- 220/440 volts
- 3 Phase
- Weight 2,425 lbs
