Monarch Metal Lathe Model No. 61
- Lathe: 13×30
- Type: Tool Makers
- Serial: 43667
- Date of Mfg: 2-59
- Model No. 61
- Weight: 5145
Category Archives: Metal Working Machinery
Monarch Metal Lathe – 72″ Between Centers
Monarch Metal Lathe – 72″ Between Centers
- Tag reads:
- Catalog size: 20″
- Serial: 41551
- Actual swing: 22.5″
- Distance between centers: 72″
- Year: 1956
We did a little looking and have found these specs from other sources for the Monarch lathe. These specs are to the best of our knowledge……that being said, you will want to double check the info using the serial number or physical inspection.
Machine Details:
- MODEL ………………………… 20CM
- SWING OVER WAYS ……………….. 22-1/2″
- DISTANCE BETWEEN CENTER ………… 72″
- SWING OVER CROSS SLIDE …………. 13″
- SPINDLE SPEEDS ………………… (12) 9 TO 400 RPM
- FEEDS ………………………… (48) .005 TO .240 IPR
- THREADS ………………………. (48) 3/4 TO 46 TPI
- DIAMETER OF SPINDLE HOLE ……….. 2-1/4″”
- TAPER ATTACHMENT ………………. YES
- SWIVEL COMPOUND ……………….. YES
- THREAD DIAL …………………… YES
- HARDEN WAYS …………………… YES
- SPINDLE FORWARD & REVERSE ………. YES
- COOLANT WITH CHIP PANS …………. YES
- MOTOR ………………………… 10 HORSEPOWER
Blanchard Grinder #18
Blanchard Grinder #18 – Lots of Chuck Life Left
- Model #18
- 36″ Chuck
- Year 1958
Moore Jig Grinder No 3
Moore Jig Grinder No 3
- Serial Number G1376
- Machine was rebuilt at a cost of $40,000 with very little use since rebuild — excellent condition
Blanchard #18 Grinder For Sale
Blanchard #18 Grinder For Sale – the chuck looks very good with a lot of chuck lift left on it
- Model #18
- 36″ Chuck
- Year 1958
V & O O.B.I. Press
V & O O.B.I. Press
- Capacity: 35T
- Serial: 35ST-403
- Stroke: 2″
- Slide Adj. 3″
- Speed: 100-300 SPM
4,500 Ton Verson Transfer Press For Sale
4,500 Ton Verson Transfer Press For Sale
- Model: TL-SE8-3000-1500-216-216-120T
- Capacity: 4,500T – @ 8″ SPM @ 1/2″ Up
- Capacity of Right Hand Slide: 3,000T
- Capacity of Left Hand Slide: 1,500T
- Stroke of Both Slides: 40″
- Power Adj. of Both Slides: 2″
- Speed: 8-18 SPM
- Equipped with: Micro Inch Drive
- Total Weight of Press: 4,190,000lbs.
Click Here For Updates on Machines & Equipment As They Become Available
John Deere Hydraulic Excavator
- Model – 600C LC
- Year – 2005
- Approx. Hours – 10,000
- Nice Machine!
200 Ton Minster High Speed For Sale
200 Ton Minster High Speed For Sale
- Model P2-200-48
- Bed Area 48” x 44”
- Year 1977
- Stroke 6“
- Adjustment: 6”
- SPM: 0-250
- Shut Height over bed: 22”
800 Metric Ton Weingarten
800 Metric Ton Weingarten
Year – 1979
Model # – DK 800.12.40
Pressing Force – 800 Metric Ton
Stroke of Slide – 400 mm — 15.748″
Strokes per Minute – 30 SPM Cont. Run
Adjustment of Slide – 100 mm — 3.93″
Area of Slide and Table – 1200 x 1200 mm — 47.24″ x 47.24″
Clearance Distance Between Columns – 1500 mm — 59.05″
Includes – loading robot and scrap trim material conveyor